BeamOn-Laser Beam Analysis

BeamOn-Laser Beam Analysis

Complete system for Laser Beam Analysis, composed of a CCD camera head, a set of 3xNG Schott colored filters (NG4, NG9, NG10) in housing, a USB 2.0 attachment, software on CD disk, carrying case, user manual.

The BeamOn system is a beam diagnostics measurement system for real-time measurement of continuous or pulsed laser beams. It measures laser beam parameters, such as: intensity profiles, beam width, shape, position and power. Software also provides report function for beam analysis settings and results (see an example on Downloads).


The BeamOn is offered with a USB attachment, software driven device, which can be connected to a Notebook (or Desktop) computer via the High Speed USB 2.0 port and run on Windows 7/8/10 OS (32 & 64 bit).


The CCD profiler over comes the limited dynamic range of camera type Beam profilers .Each measurement is performed at a different attenuation or electronic shutter speed. Duma patented technology enables the users to view features that are smaller than 1% of the laser beam’s maximum power density.



Parameters Value
Camera type Monochrome interline transfer CCD,1/2″format
Sensor active area 6.47mm wide ×4.83mm high
Pixel size 8.6um(H)×8.3um(V)
Dimensions Ø64mm dia×48mm deep with 3 filters instanlled
CCD focal position Optical distance from camera front surface to sensor surface is 4.6±0.2mm
Spectral response BeemOn UV-NIR  190~1310nm
BeamOn Vis-NIR   350~1310nm
BeamOn-IR 1550: 1550±50nm
(*)Model BeamOn-IR 1550 is based on the standed CCD for VIS,which is coated with a conversion coating,enabling capture of singnals at the 1550±50nm.See response curve below.
Weight 295 gr.with cable
Power consumption 12V,2.6Watts
Accessories included 1×plastic cap
3×NG 1.6mm thick Schott colored filtter in houseing(NG4,NG9,NG10)-Included,stackable
One×8/32 threaded mouting hole
Dynamic range Up to 1011 using  software controlled gain control,electronic shutter and external filters
Shutter speed 1/50s to 1/100000 sec,9 steps
Software controlled gain 6dB to 60dB,16steps
Maximum frame rate 25Hz
Sensitivity 0.5 nW/cm2@633nm(VIS-NIR,UV-NIR)
5uW/mm2@1550nm(model IR 1550)
Saturation intensity 1mW/cm2,no filters(VIS-NIR,UV-NIR)
5mW/cm2 no filters(model IR 1550)
Damage threshold 50W/cm2 or 1J/cm2 with  filters
Null In CW mode,null function is avaliable to automatically substract backgroud
Operation with pulse lasers Abillty to capture and replay image from slowly pulsing laser(1~100Hz)while filtering out frames with no laser pulse.Gain control and external filter make it easy to abtain optimal intensity
Triggering In pulsed mode,sliding bar control allows setting of threshold so as to display only frames with captured pulses.
Max frequency for single pulse display 10KHz

Ordering Information

The system comes with a camera, a post, a set of 3XNG Schott colored filters (NG4, NG9, NG10) in housing, a PCI card / USB2.0 attachment, software on CD disk, carrying case. Select PC interface when ordering.

  • BeamOn-VIS-NIR: 350-1310nm
  • BeamOn-UV-NIR: 190-1310nm Windowless CCD
  • BeamOn-IR 1550: 1550nm+/-50nm

Additional accessories

SAM1 Beam sampler (ratio 3X10^(-3))

SAM2 Beam sampler (ratio 1X10^(-6))

SAM3-A Beam sampler polarization preserving (ratio 0.0016 Avg)

RDC Beam reducer (ratio 2X1)

RDC-FILT: Filter mounted on RDC, 1/8 ND type, M37X0.75

MOUNTB: Mounting base

NG-Filters: 1.6mm thick Schott colored filter in housing with adaptor, types: NG4/NG9/NG10


There are no reviews yet.

Be the first to review “BeamOn-Laser Beam Analysis”

Your email address will not be published. Required fields are marked *

Go to Top