BeamOn WSR-Laser Beam Analysis

BeamOn WSR-Laser Beam Analysis

Wide Spectral range 190nm to 1600nm CCD Beam Profiler

Complete system for Laser Beam Analysis, composed of a CCD camera head, a set of 4xND filters (ND8, ND64, ND200, and ND1000) in housing, a USB 2.0 interface, software on CD disk, carrying case, user manual on CD.

The BeamOn WSR system is a beam diagnostics measurement system for real-time measurement of continuous or pulsed laser beams. It measures laser beam parameters, such as: intensity profiles, beam width, shape, position and power. Software also provides report function for beam analysis settings and results.


The system is based on a USB interface, software driven device, which can be connected to a Notebook (or Desktop) computer via the High Speed USB 2.0 port and run on Windows 7 / 8 / 10 OS (32 & 64 bit).


The CCD profiler over comes the limited dynamic range of camera type Beam profilers .Each measurement is performed at a different attenuation or electronic shutter speed. Duma patented technology enables the users to view features that are smaller than 1% of the laser beam’s maximum power density.



Parameters Value
Camera type WSR Wide Spectral Range CCD,1/2″format
Sensor active area 6.47mm wide ×4.83mm high
Pixel size 8.6um(H)×8.3um(V)
Dimensions 80mm×78.5mm×49mm
CCD focal position 17.7mm between sensor and filter in filter wheel
Spectral response BeemOn UV-NIR    190~1600nm
BeamOn Vis-NIR   350~1600nm
Weight 400 gr.with cable
Power consumption 5V/0.6A through USB 2.0port
Accessories included one IR-Edge filter.(removable).
Equipped with a built-in filter wheel,with 4×ND 2mm thick filters.
One×8/32 threaded mouting hole,one post.
Dynamic range Up to 1015 using all filters and software controller ellctronic shutter and gain
Shutter speed 1/50×256sec to 1/100000 sec,17 steps manually,or automatic
Software controlled gain 6dB to 41dB,2dB steps manually,or automatic.
Maximum frame rate 25Hz,excluding slow shutter operation
Sensitivity 2.9 pW/mm2@633nm(shutter 1/50,gain 40dB)
29uW/mm2@1310nm(with hood,IR Edge filter,shutter 1/50,gain 40dB)
1mW/mm2@1550nm(with hood,IR Edge filter,shutter 1/50×32,gain 40dB)
Down to 3uW/mm2 with shutter 1/50×256
Saturation intensity 1mW/cm2 at 633nm with no filter installed
Damage threshold 50W/cm2 or 1J/cm2 with all filters installed
Null Null function is avaliable to automatically substract backgroud
Operation with pulse lasers Abillty to capture and replay image from slowly pulsing laser(1~100Hz)while filtering out frames with no laser pulse.Gain control and external filter make it easy to abtain optimal intensity
Triggering In pulsed mode set threshold by slide bar to display frames with capture pulses
Image resolution 720×576


There are no reviews yet.

Be the first to review “BeamOn WSR-Laser Beam Analysis”

Your email address will not be published. Required fields are marked *

Go to Top