ES300 SERIES DC Power Supply

ES300 SERIES DC Power Supply

Output power: 300 W

Laboratory DC power supply

Programmable, regulated PSU

Bench or 19″ rack mounting

Units:

Unit Voltage range Current range
ES 030-10 0 – 30 V 0 – 10 A

Features:

  • Very low output ripple and spikes
  • EMC surpasses CE requirements: low emission & high immunity
  • High programming speed
  • Excellent dynamic response to load changes
  • Protected against all overload and short circuit conditions
  • Designed for long life at full power

Functionalities:

  • Master/Slave parallel and series operation with voltage and current sharing
  • Voltage and current control with 10-turn potentiometers
  • For laboratory use or optional 19” rack mounting

Specifications:

Input voltage (single phase) 92-265 V AC (48-62 Hz)
Active Power Factor Correction (PFC) 0.99 / 0.96 (at 100% load)
Efficiency up to 86% (at full load)
Output ripple and spikes 5 mV rms / 15 mV pp
Regulation 10 mV (0-100% load step)
Recovery time 50 µs (50-100% load step)
Programming speed 0.8 ms (10-90%)
Analog programming accuracy 0.20%
Output voltage and current stability 30.10-5 / 10.10-4
MTBF 500.000 hrs
Operating ambient temperature -20 to +50 ºC

Standards:

  • Power supply standard : EN 61204-3
  • Generic Emission : EN 61000-6-3 (EN 55022B)
  • Generic Immunity : EN 61000-6-2
  • Safety : EN 60950 / EN 61010
  • Insulation input / output : 3750 V rms
  • Protection class : IP20

Dimensions and weight:

  • Width = half 19
  • Height = 66 mm (incl. feet)
  • Depth = 333 mm
  • Weight = 3.1 kg

Reviews

There are no reviews yet.

Be the first to review “ES300 SERIES DC Power Supply”

Your email address will not be published. Required fields are marked *

Go to Top