SpotOn Analog- Position Sensing

Home/Duma, Laser Measurement Instruments, Position Sensing/SpotOn Analog- Position Sensing

SpotOn Analog- Position Sensing

A complete system based on a PSD sensor (Lateral Effect type) with 3m long attached cable, an electronics box and power supply.​

A complete solution for fast and extremely accurate beam positioning. The system measures both optical beam position and power.

The system offers high frequency optical beam positioning, with update rate of up to 30 KHz (for the 9x9mm PSD) and up to 60 KHz (for the 4x4mm PSD). The system measures both CW and pulsed beams, the resolution is down to 1 um.


Power supply voltage (included) Si PSD
Sensor size  4×4 mm model SPOTANA4, 9×9 mm model SPOTANA9
Operating temperature 0°- 50°C
Wavelength 350 – 1100 nm
Resolution  Better than 1 mV for CW beams, better than 5 mV for pulsed beams
Conversion factor 1 mV = 1 μm
Response time 16μs (4×4), 33μs (9×9)
Input power range Analog – 60 kHz (4×4), 30 kH (9×9)
Output voltage range (position X, Y) ± 5V
Output voltage range (Power) ≤ 10V
Included Power Supply Specifications 100 – 240 VAC typical
Input frequency 50 – 60 Hz
Output power 10 W, ± 18V
Safety Standard UL1950/EN60950 Class II
EMI Meet EN55022/FCC Class B

Ordering Information

  • SPOTANA-4L: System with 4x4mm PSD, Low amp.
  • SPOTANA-4H: System with 4x4mm PSD, High amp.
  • SPOTANA-9L: System with 9x9mm PSD, Low amp.
  • SPOTANA-9H: System with 9x9mm PSD, High amp.


NG4 Filter: NG4 filter in mounting ring, ¾” – 32 thread

NG9 filter: NG9 filter in mounting ring, ¾” – 32 thread

Hood: 55mm long hood for ambient light suppression


There are no reviews yet.

Be the first to review “SpotOn Analog- Position Sensing”

Your email address will not be published. Required fields are marked *

Go to Top