STA-01-Micro Laser Nd:LSB

STA-01-Micro Laser Nd:LSB

1064 nm wavelength micro lasers family produce short pulses at high repetition rates, and of a high peak power.

Diode Pumped Nd:Yag Solid-State Micro Laser delivers high peak powers (up to 200 kW) with sub-nanosecond pulse lengths or high repetition rates (up to 200 kHz) and are now available from Standa. This family of highly reliable, solid-state lasers consists of a power supply unit and laser head. The power supply unit includes a laser diode (LD) driver, fiber pigtailed LD, and internal pulse generator. Micro Laser pulse repetition rate can be set by Standa from single pulse to max repetition rate agreed with customer. The laser operates from external or internal trigger mode. STA-01 Micro Laser – produces pulses of fundamental wavelength.


Models * STA-01-1 STA-01-2 STA-01-3 STA-01-4 STA-01-5 STA-01-6 STA-01-7 STA-01-8 STA-01-9
Wavelength, nm 1064
Average Output Power (max), mW 140 100 120 125 65 20 100 200 40
Pulse Energy, µJ 2 2 3 5 6.5 20 100 200 0.4
Pulse Width (FWHM), ns 0.5 0.6 0.8 0.6 0.7 < 0.2 0.6 0.6 0.4
Repetition Rate (max), kHz 70 50 40 25 10 1 1 1 100
Beam Profile M2 ≤ 1.1
Pulse Spectral Structure Single longitudinal mode
Polarization Ratio > 100 : 1
Beam Waist Diameter Inside the Laser Head 1/e2, µm 25 – 400
Pulse Spectrum FWHM, pm < 5 (near transform limited)
Pulse to Pulse Energy Stability RMS < 0.4
Power Stability Over Six Hours < ±1.5%
External Power Supply Voltage, V AC 100 – 240
Operating Temperature, °C 22±1 1, non-condensing
Interfaces USB, External Trigger (TTL rising edge) 1 Hz – max repetition rate
Laser Head Dimensions:
Diameter, mm 25
Length, mm 44.5
Warranty 12 months or 5000 hours whichever occurs first
Laser Head Cooling Radiator: 12LGL2-25 included
Laser Controller Cooling Included

* Each Standa STA-01 laser is equipped with proper heatsink by default.

1 – Is specified an ambient temperature at which the laser parameters exactly meet the specifications in the table.

Specifications are subject to changes without advance notice.


There are no reviews yet.

Be the first to review “STA-01-Micro Laser Nd:LSB”

Your email address will not be published. Required fields are marked *

Go to Top