STA-01-OEM Nd:YAG Solid-State Micro Laser

Home/Lasers and Laser Systems, Solid-State Lasers, standa/STA-01-OEM Nd:YAG Solid-State Micro Laser

STA-01-OEM Nd:YAG Solid-State Micro Laser

355 nm, 266 nm wavelength Third and Fourth harmonics

Sub nanosecond (<1 ns) single longitudinal mode passive Q-switched Nd:Yag micro lasers available from Standa are able to provide output peak power up to 200 kW, high pulse repetition rates up to 120 kHz and excellent beam profile M2<1.2. This family of high reliable, solid-state diode pumped lasers consists of a controller unit and a laser head. The controller unit includes a laser diode (LD) driver electronics, fiber pigtailed laser diode, and internal pulse generator. Built-in pulse generator can be replaced by external TTL triggering is a standard feature for all models.

Easy to deploy and use our OEM laser system lets you to concentrate on experiment rather than waste time on the laser. Please check the image below to find the available OEM product ranges. Dots indicate already manufactured OEM lasers.

  • TEM00 and pulsed spectral structure SLM
  • Cost effective 1062.5 nm / 1064 nm output wavelength
  • High output energy and peak power
  • High repetition rates up to 120 kHz
  • High beam quality (M2<1.1)
  • Sub nanosecond pulses (<1 ns)
  • High reliability and stability
  • Compact OEM design
  • Cost effective
Models STA-01-TH STA-01-FH
Wavelength, nm 355 266
Average output power (max), mW 15 20
Pulse energy, &micro;J > 1.5 20
Pulse duration, ns < 0.5 < 0.5
Repetition rate (max), Hz* 10000 0.1-1000
Beam Profile M2  < 1.2
Pulse spectral structure single longitudinal mode
Polarization ratio > 100:1
Beam Waist diameter inside the laser head 1/e2, &micro;m** 25 – 200
Pulse spectrum FWHM, pm < 5 (near transform limited)
Pulse to pulse energy stability RMS < 0.6
Power stability over six hours*** <± 1,5%
External power supply voltage, V AC 100 – 240
Operatin temperature,°C 22±1 1 , non-condensing
Interfaces USB, External trigger (TTL rising edge) 1Hz…max repetition rate
Laser head dimensions:
diameter, mm 30
length, mm 120
Warranty 12 months or 5000 hours whichever occurs first

*Selected operational frequency is set by manufacturer.
**Waist position depends on model.
***After 5 to 10 minutes warm-up and temperature variation of of <±3°C and <3°C/hour
1 – Is specified an ambient temperature at which the laser parameters exactly meet the specifications in the table.


There are no reviews yet.

Be the first to review “STA-01-OEM Nd:YAG Solid-State Micro Laser”

Your email address will not be published. Required fields are marked *

Go to Top