Stage Controller MC-CQ-B Single Axis

Home/NAI, Optics and Laser Accessories, Opto-Mechanics/Stage Controller MC-CQ-B Single Axis

Stage Controller MC-CQ-B Single Axis

The newest addition to National Aperture’s family of electronics is the MC-CQ DC-Servo Motion Controller/Amplifier.

This small package contains not only a single-axis motion controller for use with our motorized stages, but also an amplifier and a user-friendly Serial Interface. Each single-axis controller can be linked to MC-CQ-B Frontmultiple Control Units for an integrated multi-axis Motion Control system.

Your purchase will include an easy to use Software Application Development Interface, and an RS-232 serial cable.

The MC-CQ is RoHS and CE compliant.

When combined with National Aperture’s “IMS Motion Console Software” users receive a “No-development-required” complete Motion Control system for up to four axes.

FEATURESMC-CQ-B Back

  • RoHS Compliant
  • CE Marked
  • Integrated Controller and Amplifier
  • Small footprint
  • Easy to use RS-232 Serial Interface
  • Linkable to multiple Control Units
  • Single-Axis becomes Multi-Axis
  • Includes Software Application Development Interface
  • DC power input with secure lock-on connection
  • Easy access fuse
  • Front access ON/OFF power switch
  • Controller provides Velocity and Position Mode closed-loop control w/programmable speed and acceleration and a rich Command-Set
  • Clean-and-Simple-Connectivity facilitates Rapid Development
  • Optional 2, 4, 8 or 16 port USB to RS-232 Expansion Module (Plug ‘n Play)

Specifications

  • Supply Voltage: 12-30 Vdc
  • PWM Switching Frequency: 78.12 Khz
  • Efficiency: 95%
  • Max Continuous Motor Current: 6 A with sufficient conductors for motor connection 1A with 28 gauge ribbon cable
  • Max Peak Motor Current: 10 A with sufficient conductors for motor connection and sufficient power supply current. 2 A with 28 gauge ribbon cable.
  • Controller Current Consumption: 60 mA (w/no Motor, Encoder, or Limit Switch Current)
  • 5 Volt Outputs: 50 mA (Max Combined Load from Encoder Vcc and Limit Vcc)
  • Limit Switch Configuration: Switches to ground expected (Controller incorporates 1 K pull-up resistors to 5 V.
  • Limit Switch Logic Levels: Low 0-0.5 V, High 4.0-5.0 V
  • Encoder Input Logic Levels: Low 0-0.5 V, High 400 Hz
  • Encoder Input Max Frequency: 400 Hz
  • Maximum Motor Velocity: 30,000 rpm (do not exceed stage speed rating)
  • Baud Rate: 600, 1200, 2400, 4800, 9600, 19,200, 38,400, 57,600, 115,200
  • Serial EEPROM Program Memory: 6656 Bytes
  • Operating Temperature: 0 to 70°C
  • Storage Temperature: -25 to +85°C

The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.

Reviews

There are no reviews yet.

Be the first to review “Stage Controller MC-CQ-B Single Axis”

Your email address will not be published. Required fields are marked *

Go to Top